Tag Archives: mirror infrared heating panel

Central heating or room by room? Energy efficient heating.

Posted on by

Central heating or room by room? Energy efficient heating.

Whether your home is a one bedroom flat or a large country house we can heat it with infrared heating panels. The principles are the same, we need to know the measurements of each room and the natural warmth of the home and some ideas of how you use your home, whether you are at home all day or out at work, that helps us advise you on the controlling of the heating and the best ways to zone areas for programming. Traditional central heating programmers have just one setting for the whole house but with infrared you can be far more flexible and energy efficient.

This week we have spoken to two customers with lovely well insulated and modern flats looking for an energy efficient heating system, for the first customer two large panels will be sufficient, one in the open plan kitchen/ living area and one in the bedroom simply run from timer switches on the plug sockets. Simple room by room heating.

But for the second customer, with a busy lifestyle and a flat with small corridors and a separate kitchen we suggested having smaller panels in each small room as this will ensure all round warmth. Dividing the flat into heating zones is far more energy efficient, for example, the bathroom and living room should be fitted to one programmer in a zone that needs to be kept warm for more hours of the day than say the bedrooms which can be fitted to a separate programmer, by fully utilising the thermostatic programmer we can provide gentle background warmth to one area without wasting energy on other areas that are not in use.

Our panels only use 350 watts, which is a very low amount of energy but more than sufficient to gently warm the small rooms of this flat and will provide comfortable warm much faster than by only having heating on in the living room and bedroom.

The running cost to heat the whole flat with infrared heating will be low as the total amount of electrical wattage used is low, and by using thermostatic programmers the energy savings will be even greater. Plus, there will be no cold draughts from unheated rooms!

So, central heating done room by room, the energy efficient way!

Efficient office heating fitted in the suspended ceiling

Posted on by

Efficient office heating solution can be fitted in the suspended ceiling.

Multiheat is a specialist provider of infrared heating panels specifically designed to fit into the suspended ceiling framework.

When decommissioning or stripping out old or ineffective heating systems the office layout can be rearranged to make better and full use of the entire floor and wall space, something that has previously been dictated by the heaters.

Any business re-fit should evoke a feel for your individual company alongside a professional atmosphere not jeopardised by unsightly heating systems but, these days, will also be concerned with carbon reduction.

Multiheat supplies drop in heaters that fit perfectly into the framework of your suspended ceiling, cabling is all hidden above, along with lighting and any other cabling, your electrician can simply wire up the heaters to a central programmer for complete heating control. The background warmth generated by infrared energy is welcoming and creates pleasant working conditions along with importantly reducing your energy consumption. Infrared heating panels have low energy use and are energy efficient.

Talk to us about reducing your office heating bills with an efficient infrared office heating solution.

Is area size the same as room size? Calculating which panel to buy.

Posted on by

Is area size the same as room size?

Are you trying to calculate which panel to buy?

On our website we give the approximate area size that each of our panels will heat, that doesn’t mean to say that the largest room size can only be 17 square metres, oh no, split the room into areas and then you just need one panel per area. Let me explain.

Our heating panels give off warmth that can be pleasantly felt on the skin. The warmth is given off from the front of the panel and radiates across the room, just like a light bulb shining, now depending on the power of the light bulb and the size of the room, there may be areas that are not particularly well lit and there may also be areas cast in shadow. So, if we want good all over light in a very large space, we need to distribute more light bulbs across the area.

In a room of 4 metres by 4 metres heated by an 850 watt panel fitted centrally on the ceiling, the warmth can easily be felt on the skin when sitting anywhere and the air will be warmed equally across the entire space.

Now in a room of 3 metres by 7 metres with an office desk at either end we could say we now have two areas and a 600 watt panel above each workstation would provide plenty of direct warmth, or three small 350 watt panels distributed equally across the ceiling would provide even warmth. Our 850 watt panel would struggle to reach the farthest ends of this room.

Remember, infrared warmth can be felt on the skin and is very pleasant if you are sitting still, either when working or in leisure time. But the ultimate aim is to warm the room evenly and completely and therefore heating panels do need to be distributed equally over a larger space. Our small 350 watt panels fit into office suspended ceilings for creating all over warmth.

New efficient bathroom mirror heater

Posted on by

New efficient bathroom mirror heater

Infrared heated mirror panels will soon be available from stock from Multiheat & Energy Systems Ltd. Electric mirror heating panels using infrared technology have a low energy consumption, costing just a few pence per hour to run. When left on for long periods infrared heating creates a warm welcoming environment, this method of home heating is very energy efficient and especially useful in the bathroom.

Attractive heated mirrors will not mist up plus they will warm the room. Infrared ray’s warm people and objects which in turn give off warmth to warm the air, in bathrooms this ensures the walls and floor are gently warmed too! Heating panels are IP 54 rated for safe use in bathrooms and wetrooms.  Made from glass with rounded edges and corners the mirror will sit in total just 2.5cm from the wall in a stylish frameless design which appears to be floating.

Mirror glass is made from ESG or German Einscheiben-Sicherheitsglass – one-pane safety glass. This kind of glass resists to impacts, extreme temperature changes and severe bending loads.  Your slim line mirror should be fitted high on the wall and cleverly hides the fact that it is the heater, avoiding the need for cumbersome fan or wall heaters and providing you with a large mist free and bright bathroom mirror.

The design benefits of having infrared heating in your home.

Posted on by

 

Infrared heating panels fitted to the wall or ceiling provide a stylish heating solution maintaining the clean lines and clarity of modern decor.

We would all agree that radiators, storage heaters, boilers and pipe work are unsightly and take up valuable space in our homes, and whilst under floor heating has become popular for those completely refurbishing or newly building a property it is simply not viable in many situations.

Glass heating panels can look stunningly attractive set high on the wall like a picture and as part of the interior decor design theme, the polished surface reflects movement and light from within the room and the gently rounded corners soften the rectangular shape. Panels should be hard wired to a programmer to hide any cabling.

Heating panels positioned high on the wall or ceiling are designed to direct warmth across the room, meaning the furniture can be positioned wherever you like rather than being determined by the radiator layout, old radiators often get hidden behind the sofa and therefore struggle to throw out any heat at all. , there are no hot spots to the room or cold corners, no draughts or air circulation, no fans to create dust or dryness, no lights or switches to get damaged, no coated metal surfaces to become scratched. In fact you will hardly notice the heater is there other than the welcoming warmth.

Heather